Roto NT Power Hinge

To Next Page

To Previous Page

Subject to change. Roto NT IMO_347_EN_v0

July 2014

Installation situation for renovation

M5 x 20

10.

Installation

Roto Eifel TB

Striker receiver

INSTALLATION ADVICE

For secure installation of the threshold, under-

lay it on the entire length with suitable base

profiles.

Main Page

Default Chapter3
- Table of Contents3
Information on These Instructions6
Responsibility of the Target Groups8
Instruction Obligation of the Target Groups9
Explanation of the Safety Instruction Symbols10
Limitation of Liability11
Stipulated Use12
Stipulated Application for End-Users13
Safety Instructions14
Safety Information for End-Users15
Fabrication Advice for Timber and PVC16
Screw Fixing17
- Timber17
- Pvc18
Eifel TB Threshold20
Dimensional Data for Hardware21
- Cross Section of Sash Profile with Eifel TB Threshold21
General Hardware Characteristics22
- NT Hinge Side K22
- NT Hinge Side E523
- NT Power Hinge24
- NT Designo25
Application Diagram26
- NT Hinge Side K 3 / 100, K 6 / 100 (PVC)26
- NT Hinge Side E5 (Timber)27
- NT Power Hinge (Timber)28
- NT Designo (Timber, PVC)29
Explanation on the Hardware Overview Chapter31
NT Hinge Side K (PVC) - Turn-Only and Tilt&Turn Hardware32
- Basic Security32
- RC1 / RC1 N and RC2 (DIN en 1627-1630)34
NT Hinge Side K (PVC) - Turn-Only / Tilt&Turn Hardware36
- Basic Security36
- Rc1 / Rc1 N (Din en 1627-1630)38
NT Hinge Side E5 (Timber) - Turn-Only and Tilt&Turn Hardware40
- Basic Security40
- RC1 / RC1 N and RC2 (DIN en 1627-1630)42
NT Hinge Side E5 (Timber) - Turn-Only / Tilt&Turn Hardware44
- Basic Security44
- Rc1 / Rc1 N (Din en 1627-1630)46
NT Power Hinge (Timber) - Turn-Only and Tilt&Turn Hardware48
- Basic Security48
NT Designo (Timber, PVC) - Turn-Only and Tilt&Turn Hardware50
- Basic Security50
- RC1 / RC1 N and RC2 (DIN en 1627-1630)52
NT Designo (Timber, PVC) - Turn-Only / Tilt&Turn Hardware54
- Basic Security54
- RC1 / RC1 N and RC2 (DIN en 1627-1630)56
Eifel TB Threshold58
- From Eifel 40 TB to Eifel 75 TB58
- From Eifel 80 TB to Eifel 140 TB59
- From Eifel 70 TB to Eifel 90 TB60
- Threshold Brackets and Setting Post Brackets61
Accessories62
- Additional Profiles62
- Wind-Stop66
- Aero-Stop67
- Gaskets68
- Juist Construction Connection Sheeting69
NT Hinge Side K70
- Sash Drillings for Threshold Application70
- Sash Drillings for Threshold Application71
NT Hinge Side E572
- Sash Drillings for Threshold Application72
NT Power Hinge73
- Frame Drillings and Routings for Threshold Application73
NT Designo76
- Carrying out Frame and Threshold Drillings76
- Hinging the Sash77
Roto Eifel TB80
- Striker Receiver80
Positioning of the Frame Components - All Hinge Sides82
Explanation on the Adjustment Chapter86
Locking Cam87
Operating Information88
Operation Information for End-Users89
Troubleshooting90
Maintenance92
Lubrication Points93
Inspection and Care94
Preservation of the Surface Finish95
Unhinging the Sash97
- Sash Stay 250, 350 and 50097
Transport, Packaging, Storage98
Transport Inspection99
Disposal of Window Hardware101

Roto NT Power Hinge - Page 81

Table of Contents

Related product manuals