R5 SOLID AIS System
THE AUTOMATIC IDENTIFICATION SYSTEM
7000 118-200, C2 Page 3
i Copyright
The entire contents of this manual and its appendices, including
any future updates and modifications, shall remain the property
of Saab TransponderTech AB at all times. The contents must
not, whether in its original form or modified, be wholly or partly
copied or reproduced, nor used for any other purpose than the
subject of this manual.
Saab TransponderTech AB, SWEDEN
ii Disclaimer
While reasonable care has been exercised in the preparation of
this manual, Saab TransponderTech AB shall incur no liability
whatsoever based on the contents or lack of contents in the
manual.
iii Software
This manual reflects the capabilities of the R5 SOLID AIS
System with Software 1.0.11. If the system has been updated
from this version, such change should be reflected on a label on
the unit. Current software version can always be verified in the
S/W info dialog as described in section 4.23.
iv Manual Part Number and Revision
Part number 7000 118-200, revision C2.
v Safety Instructions
Note the following compass safe distances:
vi Disposal Instructions
Broken or unwanted electrical or electronic equipment parts
shall be classified and handled as ‘Electronic Waste’. Improper
disposal may be harmful to the environment and human health.
To Next Page
Loading...
