Sakai TW352 - Page 79

3-001
INSPECTION AND ADJUSTMENT
1. Standard Value Chart
1-1. SW352, TW352 ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・3-002
1-2. SW502, TW502
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・3-003
2. Inspection and Adjustment
2-1. Measurement and adjustment of pressure in propulsion main circuit ・・・・・・・・3-101
2-2. Measurement and adjustment of propulsion charge circuit pressure ・・・・・・・・・3-102
2-3. Measurement of propulsion motor speed selecting pressure
・・・・・・・・・・・・・・・・・・・3-103
2-4. Measurement of brake release pressure・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・3-104
2-5. Measurement of vibrator circuit pressure ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・3-105
2-6. Measurement and adjustment of steering circuit pressure
・・・・・・・・・・・・・・・・・・・・・・・3-107
2-7. Throttle linkage adjustment ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・3-108
2-8. Adjustment of F-R lever linkage stroke ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・3-109
Precautions for Use of Standard Value Chart
1) Values in the chart are based upon ones approved when the machine leaves the factory. They
should be used for estimation of parts wear after extended operation and for guidance of repair.
2) Vaules in the chart are ones based on various test results etc. They should be used for a guide
tor fault finding practice in due consideration of the past repair frequency and operating record of
the machine.
3) Values in the chart should not be used as standard for claim application.
Precautions for Checking, Adjustment and Fault Diagnosis
*
For checking, adjustment and fault diagnosis, park the machine on level ground and
engage the safety pins.
*
When working with other workers, use hand signals positively and keep people not
concerned away from the work area.
*
Cool off the engine coolant or hydraulic fluid when removing the radiator cap or the
hydraulic tank filler cap. Hot fluids can burn you.
*
Do not put your hands close to parts in motion such as fan belts.