88 • X Mode ER-650/650R
Training Mode
A training mode is available so that the register can be operated, to practice registrations,
without updating totals and counters. If you choose to use training mode, you must set a
training mode password (see "Training Mode Password" in the "Program Mode
Programming" chapter.)
Note: If you make registrations to check tracking numbers in training mode, remember that
the check tracking total will be updated. Remember to pay, or clear any check tracking
registrations before resuming normal operations. You must close all open checks prior to
entering training mode.
1. From the MANAGER MODE menu press 5 to enter or exit training mode:
ENTER/EXIT TRAINING
REGIST. IS CURRENTLY
NOT IN TRAINING
TO ENTER TRAINING
ENTER 4 DIGIT PASSWD
AND PRESS ENTER
2. The ENTER/EXIT TRAINING screen displays. The screen will display the
current status. To enter training mode, type your four digit password (you must
enter preceding zeros) and press ENTER. To exit training mode, type 0000 and
press ENTER.
To Next Page
Loading...
