ER-650/650R Program Mode Programming • 123
PLU Programming
To accommodate UPC scanning, each PLU can be given an identifying number up to 14
digits in length.
1. At the PGM control lock position menu, press 0 for PLU Programming. The
PLU PROGRAMMING screen displays:
PLU PROGRAMMING
0.ADD/MODIFY PLU
1.DELETE PLU
Add/Modify PLU
1. Press 0 to add or modify a PLU. The PLU NUMBER screen displays:
PLU NUMBER
∗ ENTER PLU NUMBER
AND PUSH PLU, OR
∗ PRESS A PLU KEY ON
THE KEYBOARD
0
2. To view the PLU # PROGRAMMING screen, enter the number of the PLU you
wish to program, or press a PLU key on the keyboard, or press a modifier key
followed by a the PLU key on the keyboard, or scan the barcode on an item.
3. Refer to "PLU Options - Reference Information" on page 126 to make program
entries or changes, press the CLEAR key to finalize and return to the
PROGRAM MODE screen.
To Next Page
Loading...
