Sam4s ER-650 - Function Key Assignment

110 • Service Mode Programming ER-650/650R
Function Key Assignment
Any key location may be reprogrammed with a function from the list of available functions
on page 110 of this manual. The default program installs the functions as they are shown
with the standard key legends.
To change the function on a specific key:
1. At the SM control lock position menu, press 6 for Key Assignment
programming. The KEY ASSIGNMENT screen displays:
KEY ASSIGNMENT
PUSH KEY TO BE
PROGRAMMED
0
2. Press any key location. The current key assignment is displayed:
KEY ASSIGNMENT
KEY NUMBER: 102
CURRENT ASSIGNMENT:
CASH
ENTER NEW CODE,
PRESS ENTER
0
3. Enter a new key code from the list of "Function Key Codes" on page 110 and
press ENTER, or press PAGE DOWN to display a list of key codes on the
screen.
FUNCTION KEYCODE
--------------------
NLU#1 - NLU#80(1-80)
ONE 81
TWO 82
THREE 83
FOUR 84
FIVE 85