ER-650/650R Service Mode Programming • 107
Clear PLU File
This selection clears the entire PLU file, including totals, counters and programming.
1. From SERVICE MODE menu press 3 to display the CLEAR PLU FILE screen:
CLEAR PLU FILE
ARE YOU SURE ? N
2. Press the YES/NO key to display Y at the "ARE YOU SURE ?" question.
Press ENTER.
3. The message "PLU FILE CLEAR" is printed and the screen returns to the
SERVICE MODE menu.
EPROM Information
This selection displays the version, check sum and date of the EPROM. You may be asked
to check you EPROM version if you contact your dealer for assistance. You should also
verify that all registers in an IRC configuration have the same version EPROM.
1. From SERVICE MODE menu press 4 . The "PLEASE WAIT" message
displays momentarily until the ER-650/650R EPROM INFO screen displays:
ER-650R EPROM INFO.
VERSION : 1.0 USA
CHECKSUM : C5FC
JUNE 24 2002
PRESS CLEAR KEY
2. Press CLEAR to return to the SERVICE MODE menu.
To Next Page
Loading...
