ER-650/650R Program Mode Programming • 159
Clerk Programming - Reference Information
Option Entry Description
NAME Alpha numeric
12 character
You can program a descriptor for each clerk. The name you
program will print on the receipt in place of the default CLERK
#1-99. Type the descriptor using the Program Overlay or by
using the descriptor code method (see page 117.) The overlay is
automatically activated when the cursor is pointing at the DESC
field.
PASSWORD 10 digit
number
If you are using a direct or code entry clerk system. The number
you set here is the number you must use to sign on or clock in/out.
DRAWER 0-2 Enter 0 to allow check track operations only. (No cash sales.)
Enter 1 or 2 (with the multiple drawer option) to select which
drawer the clerk will open.
To Next Page
Loading...
