230 • Program Mode Programming ER-650/650R
Machine No.
The machine number is printed on the register receipt. Program a machine number so that
any receipt can be identified with the store or register where the transaction took place. The
machine number may be a different number than the IRC register number programmed in
IRC programming (see "IRC Options" in the "Service Mode Programming" chapter.)
1. From the PGM control lock position menu, press 00 for MORE. The
PROGRAM MODE page 2 screen displays. Press PAGE DOWN to view the
remainder of the page 2 program options.
2. From the PROGRAM MODE page 2 screen, press 7 for MACHINE NO.
The MACHINE # PROG. screen displays:
MACHINE # PROG.
MACHINE # 0
3. Type the machine number, up to 5 digits, press ENTER.
To Next Page
Loading...
