Sam4s ER-650 - KP Starting no

98 • Z Mode ER-650/650R
KP Starting No.
In many fast service installations multiple registers may print to the kitchen. This feature
allows the user to assign the KP starting order, allowing the staff to track the register that
each order originates from.
1. From the RESET REPORT MODE menu press 5 to select KP STARTING
ORDER No. The KP STARTING ORDER No. screen displays:
KP STARTING ORDER
NUMBER (0-9999)
0
2. Enter the order number that KP orders will start with and press ENTER.
3. Set this number at each register.