180 • Program Mode Programming ER-650/650R
CURRENCY CONVERSION 1-4
1. Press one of the CURRENCY CONVERSION keys to view the appropriate
currency conversion function key options:
CONVERSION #1 PROG.
DESC : CONV1
RATE 0
NUMBER OF DEC. 0
2. Press ENTER from the last field to return to the FUNCTION KEY
PROGRAM screen, or press ESC at any time to return to the FUNCTION
KEY PROGRAM screen without saving changes.
CURRENCY CONVERSION 1-4 Program Notes
DESC Alpha numeric
12 character
You can program a descriptor for each foreign currency. The
default descriptors are CONV 1-4.
RATE 5 digits Enter the exchange rate of up to 5 digits (do not enter the decimal
point). See the examples on the next page.
NUMBER OF DEC. 1 - 6 Enter a number from 0 to 6 to indicate the decimal position of the
exchange rate. Count the decimal position from the right. See
the examples below.
Currency Exchange Rate Programming Examples
Note: Foreign currency exchange rates can be stated as “foreign currency in dollars”, or
“dollars in foreign currency”. Use the rate stated in “dollars in foreign currency” when you
are programming this section.
The US dollar (home currency) is worth 1.3720 Canadian dollars (foreign currency).
RATE: 13720
NUMBER OF DEC.: 5
The US dollar (home currency) is worth 110.24 Japanese Yen (foreign currency).
RATE: 11024
NUMBER OF DEC.: 2
To Next Page
Loading...
