ER-650/650R Integrated Payment Appendix • 261
Issue Batch Status
The Local Batch Status Report also prints when a batch is closed.
DATE 5/24/2004 WED TIME 10:34
**** LOCAL BATCH STATUS ****
0 4 3 3 2.00 0 .00
CLERK 1 000065 00000
Local Batch Status Explanations:
(From Left to Right)
o Batch Status C=Closed/O=Open
4 Batch Number
3 Batch Transaction Count
3 Batch Item Count
2.00 Batch Balance
0 Batch Forwarded Transaction Count
.00 Batch Forwarded Balance
Dial In Load/Dial Out Load
If instructed by Datacap support, you can use these options to update DataTran software.
Choose Enable Dial In Load to allow Datacap to call the DataTran and send updates.
Choose Enable Dial Out Load to call Datacap to connect. You will be required to enter the
phone number and terminal I.D.
Tip Operation
Follow the prompts to enter the record number, original transaction amount and tip amount.
If the record number and transaction number are valid, the tip amount is entered in the batch
and a tip entry chit prints.
See Explanations
To Next Page
Loading...
