Sam4s ER-650 - Automatic Scale Entry; Tare Weight Entry

78 • Operating Instructions ER-650/650R
Automatic Scale Entry
Place a product on the scale and make the appropriate PLU entry. The PLU must be set
with "auto scale status".
1. Place an item on the scale.
2. Press a PLU key, if the item is a preset
item, or enter the price per pound on the
ten key pad. Do not use the decimal
key. For example, for $3.00, enter:
3 0 0
3. Press a PLU key. For example, press
PLU 1:
1
THANK-YOU
CALL AGAIN
DATE 08/15/1999 SUN TIME 08:33
1.50 lb @3.00/lb
PLU1 $4.50
TAX1 $0.27
TOTAL $4.77
CASH $4.77
CLERK 1 No.000011 00001
Tare Weight Entry
1. Place an item on the scale.
2. Enter the preprogrammed tare number.
Press the TARE key.
1 TARE
3. Press the SCALE key.
SCALE
4. Note that the weight, less the tare weight,
is displayed on the screen. Enter the
price per pound on the ten key pad. Do
not use the decimal key. For example,
for $3.00, enter:
3 0 0
5. Press a PLU key. For example, press
PLU 1:
1
THANK-YOU
CALL AGAIN
DATE 08/15/1999 SUN TIME 08:33
1.50 lb @3.00/lb
PLU1 $4.50
TAX1 $0.27
TOTAL $4.77
CASH $4.77
CLERK 1 No.000011 00001