Sam4s ER-650 - Tare

202 • Program Mode Programming ER-650/650R
TARE
1. Press the TARE key to view the Tare function key options:
TARE KEY PROG.
DESC : TARE 
KEY DISABLE N
UNDER MGR CONTROL N
#5 IS MANUAL TARE N
2. Press ENTER from the last field to return to the FUNCTION KEY
PROGRAM screen, or press ESC at any time to return to the FUNCTION
KEY PROGRAM screen without saving changes.
TARE Key Program Notes
Option Entry Description
DESC Alpha
numeric
12 character
You can program a descriptor. The default descriptor is TARE.
KEY DISABLE Y or N
Select Y to disable this function.
UNDER MGR
CONTROL
Y or N
Select Y if you do not want the operator use this function in
REGISTER mode. When selected, the function is allowed only
in the X control lock position.
#5 IS MANUAL
TARE
Y or N
Choose Y to use tare number five to manually enter a tare weight.