Sam4s ER-650 - Tare Weight

226 • Program Mode Programming ER-650/650R
Tare Weight
A tare is the amount of weight representing the container, or package when items are sold by
weight. You can pre-program five tare weights, representing the weight of different
containers. When you place an item and a container on an optional scale, you can enter the
tare number to automatically subtract the pre-programmed tare weight.
If you choose to use tare #5 for manual tare weight entry, do not enter a weight for tare #5.
(See TARE on page 202.)
1. From the PGM control lock position menu, press 00 for MORE. The
PROGRAM MODE page 2 screen displays.
2. From the PROGRAM MODE page 2 screen, press 5 for TARE WEIGHT.
The TARE WEIGHT PROG. screen displays with the cursor arrow pointed at
the weight for tare #1:
TARE WEIGHT PROG.
TARE 1 : 0.000
TARE 2 : 0.000
TARE 3 : 0.000
TARE 4 : 0.000
TARE 5 : 0.000
3. Type the weight for the first tare, press ENTER. The cursor advances to TARE
2. Type the weight for the second tare and press ENTER. Continue until all 5
tares are programmed, or press ESC to exit.