ER-650/650R Service Mode Programming • 109
3. Continue filling each field until complete. Press ENTER after setting the last
field, "# LINES/SOFT CH". The screen will display "ARE YOU SURE ?". N
(No) will display as the default answer to the question. If you wish to
implement the new allocation you have entered, press the YES/NO key, then
press ENTER.
4. The message "PLEASE WAIT . . . . " displays until the printer prints either:
"MEMORY ALLOCATION OK !" or "MEMORY ALLOCATION SIZE
OVER" if you attempt to allocate features requiring more memory than is
available.
5. The SERVICE MODE menu screen displays when memory allocation
programming is completed.
To Next Page
Loading...
