Sam4s ER-650 - Page 128

116 • Service Mode Programming ER-650/650R
8. Press PAGE DOWN to view page 7 of the RS232C port program:
PORT 1 PROGRAM pg7
PRINTER TYPE 0
14:STAR SP-200
15:STAR SP-298
16:STAR SP-300
17:STAR TSP-200
9. Press PAGE DOWN to view page 8 of the RS232C port program:
PORT 1 PROGRAM pg8
POLE DISLAY TYPE 0
0:EPSON 1:ICD
RS232C RETRY
TIMES(0-99) 1
10. Refer to "RS232C Settings Screen Program Notes" on the next page to fill the
fields for each port.
11. Press the CLEAR key to finalize and return to the SERVICE MODE screen.