130 • Program Mode Programming ER-650/650R
4. Enter the number of the last PLU in the range you wish to delete and press PLU.
The CONFIRM DELETE screen displays:
CONFIRM DELETE
ARE YOU SURE YOU
WISH TO DELETE PLU#
?????????????? TO
??????????????
ENTER=DELETE
ESC=ABORT
5. Press ENTER to delete the PLU; press ESC to return to the PLU DELETE
screen without deleting the PLU.
Note: Before a PLU can be deleted, all report information must be cleared. I may be
necessary to run a Z1 and Z2 PLU Report, and if the PLU is an inventory item, you must
change the stock to zero.
To Next Page
Loading...
