Sam4s ER-650 - Page 174

162 • Program Mode Programming ER-650/650R
#/NO SALE Function Options
Option Entry Description
DESC1 Alpha numeric
12 character
You can program a descriptor for the no sale function. The
default descriptor is NOSALE.
DESC2 Alpha numeric
12 character
You can program a descriptor for the non add # function. The
default descriptor is NON ADD #.
KEY DISABLE Y or N
Select Y to disable this function.
UNDER MGR
CONTROL
Y or N
Select Y to allow operation only in manager operation mode.
INHIBIT NO SALE
AFTER NON-ADD #
Y or N
Select Y if you want disable the NO SALE function after a non-
add number is entered.
ENFORCE # ENTRY
AT START OF SALE
Y or N
Select Y if you wish to enforce the entry of a non-add number at
the beginning of each transaction. (For example, to track the
number of customers in each sale, or to identify a customer
number with each sale.)
PRINT ON N/S Y or N
Select N to stop printing when a NO SALE is performed.
NON-ADD #
PROHIBIT
Y or N
Select Y to disable the non-add # function.
COMP NON-ADD #
MUST MATCH
MAX DIGIT
Y or N
Select Y if you wish all non-add number entries to have the exact
number of digits selected in the MAX DIGIT flag below.
MAX DIGIT (0-8) 0-8 Enter the maximum number of digits for non-add number entry.
Zero (0) means no limit.