Sam4s ER-650 - ADD CHECK

ER-650/650R Program Mode Programming • 165
%1 -%5 Function Options
Option Entry Description
DESC Alpha numeric
12 character
You can program a descriptor. The default descriptors are % 1-
4.
AMOUNT:Y %:N Y or N
Select Y if you wish this key to apply an amount (as in a
coupon). Select N if you wish this key to apply a percentage
(as in a discount or surcharge).
RATE 5 digit If the function is an amount, enter an amount from 0 to 999.99.
If not zero, the amount will be the preset coupon amount. If the
function is a percentage, enter a percentage from 0 to 99.999%.
If not zero, the percentage will be the preset percentage
KEY DISABLE Y or N
Select Y to disable this function.
UNDER MGR
CONTROL
Y or N
Select Y if you do not want the operator use this function in
REGISTER mode. When selected, the function is allowed
only in the X control lock position.
OPEN:Y PRESET:N Y or N
Select Y if you with the amount or percentage to be entered by
the operator; select N if you with the amount or percentage to be
preset.
SALE:Y ITEM:N Y or N
Select Y if you wish the amount or percentage to apply to the
sale total. Select N if you wish the amount or percentage to
apply to an item.
OVERRIDEABLE Y or N
Select Y if you wish to enter a percentage or amount to override
the preset percentage or amount set in the RATE field.
POS.:Y NEG.:N Y or N
Select Y if you wish the amount or percentage to add to the sale
total. Select N if you wish the amount or percentage to subtract
from the sale.
TAXable BY TAX1
TAXable BY TAX2
TAXable BY TAX3
TAXable BY TAX4
Y or N
Select N to tax any taxable items before the discount or
surcharge is applied (tax the gross amount). Select Y to tax any
taxable items after the discount or surcharge is applied (tax the
net amount).
F/S ELIGIBLE Y or N
Select Y to reduce (increase) the food stamp subtotal by the
amount of % entry.
ALLOW ONLY ONE
TIME SUBTOTAL
ENTRY
Y or N
If Y, you can enter only a single coupon and you must press the
SBTL key before the coupon entry.
ALLOW MULTIPLE
AMOUNT DISCOUNT
(COUPON) WITHOUT
SUBTOTAL ENTRY
Y or N If you set a % key to be used for vendor coupons (i.e. amount,
negative and sale status) then choose Y to allow the function to
be operated multiple times, without requiring the SBTL key to
be pressed prior to the coupon entry.
PRESET OVERRIDE
IN MGR ONLY
Y or N
Select Y to allow preset override only in manager operation
mode.
COMPULSORY
VALIDATION
Y or N
Choose Y to enforce validation if an optional printer with
validation capability is connected to an RS-232C port.