Sam4s ER-650 - Page 198

186 • Program Mode Programming ER-650/650R
3. Enter the number of the menu position (there are eight functions listed on each
function look up menu) that you wish to edit, press ENTER.
FUNC #1 MENU ASSIGN.
MENU NUMBER : 1
CURRENT ASSIGNMENT
CHARGE1
ENTER NEW FUNC CODE,
PRESS ENTER
0
4. Type the code for the function you wish to place on the function look up key
menu, press ENTER. See "Function Key Codes" in the "Service Mode
Programming" chapter, or press PAGE DOWN to view a list of functions and
codes.
5. Go to step 2 above and continue to program menu numbers for the function look
up key, or press ESC to return to the PROGRAM MODE menu.