Sam4s SPT-3000 - System On;Off

2-8
System On/Off
System On
After installation of system, proceed to power on the system with following steps.
1
2
3
4
Introductions
Safety Instructions
Connecting the
External Device
Turning the System
On and Off
Getting Started
Using this system
Removal and
Replacement
BIOS Setup
Exploded View
and Replaceable
parts
How to use PDF
e-manual
HOME
Removing the Cover
Cable
Help Printer
Exit
Content
Power up the peripherals which are connected with the system.
Press the power button placed at the left side of system LCD (Open the power button cover and press).
PWR light is to be lit at the right bottom of the LCD front.
Windows initial screen can be seen after a while.
power bottom
power light