Introductions
Removal and
Replacement
BIOS Setup
Exploded View
and Replaceable
parts
How to use PDF
e-manual
System Set up
Help Printer
Exit
Content
Hardware Health Configuration
Chassic Intrusion
The field enables or disables the feature of recording the chassis intrusion
status and issuing a warning message if the chassis is once opened. To clear
the warning message, set the field to [Reset]. The setting of the field will
automatically return to [Enabled] later.
These items display the current status of all of the monitored hardware devices
/components such as CPU voltage, temperatures and all fans’ speeds.
This setting specifies the pin numbers of the system fan power connector.
Select the operation mode of FAN 1.
This setting controls the Smart Fan feature. Smart Fan is an excellent feature
which will adjust the CPU/system fan speed automatically depending on the
current CPU temperature to prevent your CPU from overheating.
You can select a temperature tolerance value here for the specific range of
the Smart Fan function.
n
CPU Temperature, System Temperature, System
Speed, VCORE, 5VSB, VCC5, 12V, VBAT
System FAN PIN Select
FIN 1Mode Setting
System FAN Mode Setting
Temperature Limit of Highest, Temperature, Limit of
Second
To Next Page
Loading...
Need help?
General
