Connectivity 119
3. Tap a Wi-Fi network to connect, enter the password (if it is not an open network), and then tap
Connect.
Your tablet is connected to the Wi-Fi network. You will see Wi-Fi connected in the status
bar.
The password, for a household wireless LAN router, is sometimes found on a sticker on the
router (WEP, WPA, KEY, etc.). Contact the router manufacturer for information. For
password for a public wireless LAN, check with user's service provider.
Entering a password is not required if an access point is not security protected.
Note: The next time your tablet connects to a previously accessed secured wireless network, you will not
be prompted to enter the password again, unless you reset your tablet to its factory default settings or you
instruct the tablet to forget the network.
Tip: You can also turn Wi-Fi on and off through the notification panel quick settings. Slide open the
notification panel and tap Wi-Fi .
To Next Page
Loading...
