Connectivity 123
2. Tap On/Off to turn Wi-Fi on.
Wi-Fi is enabled. You will see the names and security settings of in-range Wi-Fi networks.
3. Tap Wi-Fi Direct in the banner at the top of the screen.
The Wi-Fi Direct settings menu appears.
Wi-Fi Direct and Wi-Fi are unavailable at the same time.
4. If a device is found, tap the device entry to connect.
If connected using Wi-Fi, you will see a confirmation. Follow the instructions.
5. Accept the connection on the other device.
The tablet is connected using Wi-Fi Direct.
If a connection is not accepted after a certain period, the connection request is cancelled.
To stop a connection, tap the device name on the Wi-Fi Direct list.
To Next Page
Loading...
