Service Manual
Alignment & Adjustments
4-6
Samsung Electronics
4. Pull the release lever to open the side cover.
5. Carefully remove the misfed paper in the direction
shown.
6. Close the cover and insert the paper Tray. Lower
the rear part of the Tray to align the rear edge with
the corresponding slot of the machine, then insert it
completely.
In the optional tray 2
1. Pull the optional tray 2 open.
2. Pull the paper Tray to open. After you pull it out
completely, lift the front part of the Tray slightly up
to release the Tray from the machine.
If the paper does not move when you pull, or if you
do not see the paper in this area, stop and go to
step 3.
3. Pull the tray 1 half.
4. Remove the paper in the direction shown. To avoid
the paper torn, pull it out gently and slowly.
To Next Page
Loading...
Need help?
General
