Santec TSL-210 User Manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | sales@artisantg.com | www.artisantg.com
SM
View
Instra

Santec TSL-210 Specifications

General

Brand	Santec
Model	TSL-210
Category	Measuring Instruments
Language	English

Summary

3. Specifications

4. Principle of Operation

5. Safety Notes and Safety Devices

6. Installation

7. Descriptions of Panel Equipment

7-1 Front Panel

Details the controls, indicators, and displays on the front panel of the TSL-210 unit.

7-2 Rear Panel

Describes the connectors and ports located on the rear panel of the TSL-210 unit.

8. Functions of This Unit

8-1. Wide-band Wavelength Tuning TSL-210

Explains how the TSL-210 achieves wide-band wavelength tuning using diffraction grating.

8-2. Coherence Control

Details the coherence control function for managing spectrum linewidth and interference.

8-3. LD Injection Current, Ambient Temperature Control Function

Describes the control of injection current and ambient temperature for stable laser operation.

8-4. Optical Output Power Control Function

Explains the APC and ACC modes for controlling the unit's optical output power.

8-5. Fine Tuning Function

Describes the fine-tuning capability for precise wavelength adjustment with high resolution.

9. Fundamental Operation

9-1 How to Turn ON

Instructions for powering on the unit and initial status.

9-1-A Turning ON/Setting RS-232C Delimiter

Details powering on and setting RS-232C delimiter.

9-1-B Optical Fiber Connection

9-1-C Cleaning the Optical Connector

9-1-D Changing LD Current/Unit of Optical Output Power

9-2 How to Use Rotary Encoder

9-3 Setting Wavelength

Instructions for setting desired wavelength using rotary encoder.

9-4-A Setting Optical Output Power (APC Function)

Details setting optical output power using the APC mode.

9-4-B. ACC Function

9-5 Fine Tuning Function

Explains using fine tuning for precise wavelength adjustments.

9-5-A. Internal Control

9-5-B. External Control

9-6 Coherence Control

9-6-A Variable Coherence Control

9-7 Low Frequency Modulation

9-8 Wavelength Calibration

9-9 Setting GP-IB Address and Delimiter

9-10 Turning OFF

Details the procedure for safely turning off the unit and its components.

10. Communication

10-1 GP-IB

10-1-D GP-IB of TSL-210

10-2 RS-232C

10-2-D. SIF connector (RS-232C)

10-2-E. Control pad

10-3 Communication Control

10-3-B. Taking Out Data

11. Maintenance

11-1. Daily Maintenance

11-2. Cleaning the Optical Connector

11-3. Replacing the Fuse

11-4. Inspection and calibration

13. Option

13-1 High Frequency Modulation

13-2 Control Pad (CP-10)

13-3 Built-in Attenuator

Describes the built-in attenuator option for optical output power control.

13-3-C Control Method

14. Troubleshooting