What to do if my Santec MPM-210 has no power?
If your Santec Measuring Instruments unit has no power, there are a couple of things to check: * Ensure the power cord is properly connected. * Inspect the fuse. If there's no fuse or the fuse is blown, open the fuse box lid and replace it.
Why is GP-IB communication not possible with my Santec MPM-210?
GP-IB communication issues with your Santec Measuring Instruments may arise due to: * Incorrect GP-IB address settings. * Improper cable connection.
Describes the front panel components and indicators of the MPM-210.
Describes the rear panel connectors and ports of the MPM-210.
Lists safety warnings and cautions for instrument installation.
Provides guidelines for safe and trouble-free operating environment.
States the maximum input power limit to prevent damage.
Describes the general structure and syntax of control commands.
Explains the electrical characteristics of the external trigger input signal.
Lists detailed technical specifications for MPM-211 and MPM-212 modules.
Lists detailed technical specifications for the MPM-213 module.
Lists overall technical specifications for the MPM-210 main unit.
Details the procedure for cleaning the optical sensor for optimal performance.
General| Wavelength Resolution | 0.001 nm |
|---|---|
| Power Accuracy | ±0.2 dB |
| Power Resolution | 0.01 dB |
| Storage Temperature | -20 to 60 °C |
| Display | LCD |
| Interface | USB |
| Weight | 3.5 kg |
| Optical Connector | FC/PC (other types optional) |
To Next Page
