Multi-Port Optical Power Meter MPM-210
11-1
Troubleshooting
11
Fault condition Cause Action
No power Cord is unconnected. Connect cord properly.
No fuse or fuse is blown out. Open the fuse box lid and
replace fuse.
GP-IB communication
is not possible
GP-IB address is not set correctly. Set GPIB address correctly.
(see section 5-2 and 5-5-1)
Cable is not connected properly. Check the connection of the
cable. (see section 5-2)
If after checking the above list, and the device is still not operating correctly, please
contact us.
To Next Page
Loading...
