Multi-Port Optical Power Meter MPM-210
4-3
CAUTION
4-8 Inserting a module
The MPM-210 (Main frame) is used to insert some modules (MPM-211/MPM-212/
MPM-213). The MPM-210 cannot allow you to insert any previous modules (MPM-10/
MPM-20).
Insertion of an incompatible module may cause equipment failure. Moreover,
please x the module using knurled screw after inserting each module.
4-7 Maximum input optical power
The maximum input power that can be applied to any port of the power meter is
16dBm. Applying more than the specied power might damage the power meter!
To Next Page
Loading...
