Santec MPM-210 - MPM-212 (Power Meter Module and Analog Output 2 Ports)

Multi-Port Optical Power Meter MPM-210
3-3
The MPM-212 has 2 optical power measuring ports and 2 analog output ports and
outputs analog voltage signal proportional the optical power per each port. The
connector of the optical input port is a FC connector receptacle and the analog output
port is a BNC male connector. Optical input port 1, analog output port 1, optical input
port 2 and analog output port 2 is arranged from top to bottom.
3-3 MPM-212 (Power meter module and analog output 2 ports)
Analog voltage output port
Optical input port