Multi-Port Optical Power Meter MPM-210
5-25
In Sweep 1 mode, user does not set Average Time. It is calculated from Sweep
speed value and Set wavelength value and applied automatically.
1. WMOD SWEEP1 - Choose measurement mode
2. WSET 1260,1290,0.01 - Set Sweep Wavelength
3. SPE 10 - Set Sweep Speed
4. LEV 1 - Set TIA Gain Level.
5. TRIG 1 - Choose external trigger.
6. MEAS - Start measurement
7. STAT? - Check current measurement status
8. STOP - Stop measurement (Option)
9. LOGG? 1,1 - Get measured value
■ 5-6-7 Sample code for SME mode measurement
To Next Page
Loading...
