Santec MPM-210 - Re-Packing and Shipping; Re-Packing; Shipping

Multi-Port Optical Power Meter MPM-210
10-1
The packing materials we used are designed to protect the instrument from the
shock or vibration during the shipment. If the instrument is shipped without packing
materials or improperly packed, the instrument might be damaged. Any instrument
damage that occurred when the instrument shipped without the original shipping
box or without proper packing will not be applicable for warranty repair, even during
the guaranteed term.
10
Re-packing and Shipping
CAUTION
Special attention for re-packing and shipping is required when you ship the instrument
for repair or to a remote location.
10-1 Re-packing
10-2 Shipping
Please make sure that the original shipping box is used during the shipment, according
to the following instructions. If the original shipping box is misplaced or damaged,
please contact our customer service department. We can arrange for the shipping box
to be sent to you.
Alternately, when the original shipping box is not available, send the instrument with a
sturdy, robust shipping box and at least 10cm packing material between the instrument
and the shipping box. The entire 10cm space on every side of the instrument should
be lled with a cushioning material.
Treat the box carefully, and avoid shock or vibration as much as possible. Maintain the
box in an upright position and label “THIS SIDE UP” in several places.