9-2
TSL-770 Operation Manual
9 - 3 Replacing Fuses
Fuses are in the fuse box above the power inlet on the rear panel. Use two surge
resistant type fuses. T3.15AL/250V(100 - 240V). Pull out the fuse box, and replace
with new fuses. Replace both of them with new ones.
9 - 4 Inspection and Calibration
TSL-770 is warranted for a period of one year. Inspection and calibration on a regular
basis (once every 12 months) is recommended. Please contact our Sales Department
concerning requests for instrument inspection/calibration or consultation on other
matters.
Power inlet and
Fuse box
To Next Page
Loading...
