Santec TSL-770 - Command Reference

7-16
TSL-770 Operation Manual
1. Common Command List
Available for IEEE-488.2 common commands in the following list.
Command Description Page
*IDN?
Identication Query
Returns strings that identify the device.
7-19
*RST
Reset (Aborts the standby command.)
7-19
*TST?
Initiates an instrument self-test and returns the results.
7-19
*OPC?
Queries the completion of operation.
7-20
*CLS
Status Clear (Clears STBR and SESR.)
7-20
*ESE
Sets Standard Event Enable Register.
(The result of SESR and SEER is set to ESB.)
7-20
*ESE?
Reads out the value of the Standard Event Enable Register.
7-20
*ESR?
Reads out the value of the Standard Event Status Register.
7-20
*SRE
Sets Service Request Enable. (Selects enable or disable SRQ.)
7-21
*SRE?
Reads out the value of the Service Request Enable Register.
7-21
*STB?
Reads out the value of the Status Byte Register.
7-21
7- 4 Command Reference