Santec TSL-770 - Page 20

5-4
TSL-770 Operation Manual
■
How to input values
Using the numeric keypad
(1) Input the value directly. Input all digits of integral numbers.
(2) Press ENTER to accept the new value.
(3) The main screen appears after setting.
Using the dial
(1) Press the ENTER key or the dial to enter input mode.
(2)Touchthedigittochange.Thedefaultdigitistherstdigit.
(3)Turnthedialtochangethevalue.Thesettingvalueisreectedimmediately.
(4) Press the ENTER key or the dial to exit input mode.
Numeric keypad input is convenient for one-time settings; dial input or cursor key input is
convenient for continuous settings.
〈
Reference:
〉
△
△
If using the dial to input a value, the screen does not go back to the main screen
after the setting is complete. Touch BACK on the screen or press Home key to go
back to the main screen.
NOTE