SRT45 Off-Highway Truck
8-11
Safety, Operation and Maintenance Manual
locations of pressure check points, are
contained in the relevant service manual
section. If the pressures are outwith the
specified settings then components in the
relevant system should be inspected, repaired
or replaced to ensure the correct operation
of the system. All safety instructions in the
relevant sections should be strictly adhered to.
Steering oil return lter-
Clean the housing for the filter , follow the
failure code from the display or working time
to replace lter if time over 1000hours.
Hoisting oil return lter - Clean the lter shell,
and install a new lter element.
Cooling oil return lter - Clean the housing for
the lter and replace new lter for it.
Steering In-line Filter - Clean the housing
for the lter , follow the failure code from the
display or working time to replace lter if time
over 500 hours.
Cooling pipeline filter - Replace with a new
spin-on lter element.
Every 2000 hours of operation
Steering In-line Filter - Clean lter housing and
install new element when indicated, or after 1
000 hours of operation,whichever comes rst.
Steering in-line lter - Clean lter housing and
install new element.
Hoisting in-line lter - Clean lter housing and
install new element.
Cooling in-line lter - Clean lter housing and
install new element.
Engine and transmission
All information contained in the 'Lubrication
and Service Chart' was extracted from the
relevant manufacturers 'Operation and
Maintenance Manual',and was correct at
time of publication.User should ensure that
information contained in this chart reflects
th e in form ati on sh own i n the r ele vant
manufacturers 'Operation and Maintenance
Manual' supplied with the Truck.
Lubrication and Servicing
To Next Page
Loading...