SANY SRT45 - Maintenance Inspection Form for 4000 Hrs

SRT45 Off-Highway Truck
8-109
Safety, Operation and Maintenance Manual
8.6.38 Maintenance inspection form for 4000hrs
Except daily (10hrs) inspection projects, the following projects also have to nish after running
4000hrs.
1. Cummins engine
Drain, replace lter and rell………………………………..................………………………..…
Check breather valve for crankcase………………………................….......……………………
Fuel system
Replace fuel lter…………………………………………………………………….………………
Cooling system
Replace coolant lter………………………………………………………………………..………
Check and supplement DCA to coolant…………….….......................................................….
2. Front brake system
Check status about disc worn to determinate replace it if required.……....……………………
3.Rear brake system
Check and record the worn status about rear brake disc unit............................................….
4.Air-condition
Check evaporimeter and cooling “S” pipe, clean as required.............................................….
Check fasteners to replace or adjust for compressor.........................................................….
Check status about coolant via window..............................................................................….
Check all system hoses and ttings for leakages...............................................................….
Check working status for air-condition................................................................................….
5.Lubrication
Front, rear transmissions cross shafts………………….……......................…..................…..4 points
Front, rear transmission shafts…………………………………………......…….................…..2 points
6.Hydraulic system
Replace new lter for the return lter of hoisting system....................................................….
Replace new lter for the return lter of cooling system.....................................................….
Replace new lter for the return lter of steering system....................................................….
Replace new lter for the lter which mounted on the pipeline of the steering system.....…..
Replace new lter for the lter which mounted on the pipeline of the cooling system........….
Replace new lter which mounted inside of the rear braking valve group.........................….
Checker Date
Remarks
Lubrication and Servicing
Courtesy of Machine.Market