SANY SRT45 - Maintenance Inspection Form for 250 Hrs

SRT45 Off-Highway Truck
8-23
Safety, Operation and Maintenance Manual
8.6.3 Maintenance inspection form for 250hrs
Except daily (10hrs) inspection projects, the following projects also have to nish after running
250hrs.
1. Cummins engine
Drain, replace lter and rell………………………………..................………………………..…
Check breather valve for crankcase……………………….......................………………………
Fuel system
Replace fuel lter…………………………………………………………………….………………
Cooling system
Replace coolant lter………………………………………………………………………..………
Check and supplement DCA to coolant…………….….......................................................….
2. Front brake system
Check status about disc worn to determinate replace it if required.……....……………………
3. Lubrication
Front, rear transmissions cross shafts………………….……......................…..................…..4 points
Front, rear transmission shafts…………………………………………......…….................…..2 points
4.Hydraulic system
Check the pressure for the system.....................................................................................….
Check the pressure for the steering system.......................................................................….
Check the pressure for the front breaking system..............................................................….
Check the pressure for the rear breaking system...............................................................….
Check the pressure for the parking system........................................................................….
Steering system: Check the pre-charge pressure for the accumulator before the checks pressure
for the steering system
Breaking system: check the pre-charge pressure for the accumulator before the checks pressure
for the breaking system
note:
a . The instruction about how to make a inspection for the hoisting , steering and breaking system
are contained in manual book
Check and replace old components with new one to ensure of the system work well if the
inspection result are different with requirement
b. Make sure the pressure drain out of the accumulator before checks the pre-charge for the
accumulator
Checker Date
Remarks
Lubrication and Servicing
Courtesy of Machine.Market