SANY SRT45 - Maintenance Inspection Form for 3550 Hrs

SRT45 Off-Highway Truck
8-99
Safety, Operation and Maintenance Manual
8.6.34 Maintenance inspection form for 3550hrs
Except daily (10hrs) inspection projects, the following projects also have to nish after running
3550hrs.
1. Hydraulic system
Replace new lter for the return lter of hoisting system.....…………......................…………
Replace new lter for the return lter of cooling system……………................................……
Replace new lter for the return lter of steering system……………................................……
Replace new lter for the lter which mounted on the pipeline of the steering system………
Replace new lter for the lter which mounted on the pipeline of the cooling system.....……
Replace new lter which mounted inside of the rear braking valve group…………..…………
Replace the breather valve for the steering hydraulic tank……………………………………..
Replace the breather valve for the hoisting hydraulic tank………………………………………
2. Cummins engine
Drain, replace lter and rell………………………………..................………………………..…
Check breather valve for crankcase………………………................….......……………………
Fuel system
Replace fuel lter…………………………………………………………………….………………
Cooling system
Replace coolant lter………………………………………………………………………..………
Check and supplement DCA to coolant…………….….......................................................….
3. Front brake system
Check status about disc worn to determinate replace it if required.……....……………………
4. Lubrication
Front, rear transmissions cross shafts………………….……......................…..................…..4 points
Front, rear transmission shafts…………………………………………......…….................…..2 points
Checker Date
Remarks
Lubrication and Servicing
Courtesy of Machine.Market