SANY SRT45 - Cab Windows Glasses; Unauthorized Modification; Examination and Confirmation of Worksite

Safety
Safety, Operation and Maintenance Manual
2-22
SRT45 Off-Highway Truck
2.2.16 Cab windows glasses
●
Broken cab windows at the side of the
work equipment may expose the operator
in direct contact with the work equipment.
In this case, stop operation immediately
and replace the glasses.
●
Broken or damaged window provides
no protection to the operator. When
the roof window is damaged, replace it
immediately with a new one.
2.2.17 Unauthorized modification
Any modification unauthorized by Sany
may lead to safety problems, personal injury
or death. Improper modification can affect
machine's strength and operator's view.
Contact your Sany distributor before making
any modication.
Sany assumes no responsibility for the
accidents, failure or damage caused by
unauthorized modication.
2.2.18 Examination and confirmation of
worksite
Before starting operations, check first if
there is any danger on the jobsite. If you do
not understand the dangers of the jobsite
before starting operations, the machine may
tip over, or the ground may collapse, or rocks
may fall,causing injury to the operator. Always:
●
Check the terrain and condition of the
ground at the worksite, and determine
the safest method of operation. Do
not operate where there is a hazard of
landslides or falling rocks.
●
Prevent any unauthorized person from
entering the operating area.
●
Before operating in shallow water or on
Fig. 2.2-17
Courtesy of Machine.Market