SANY SRT45 - Maintenance Inspection Form for 2000 Hrs

SRT45 Off-Highway Truck
8-63
Safety, Operation and Maintenance Manual
8.6.20 Maintenance inspection form for 2000hrs
Except daily (10hrs) inspection projects, the following projects also have to nish after running
2000hrs.
1. Cummins engine
Drain, replace lter and rell………………………………..................………………………..…
Check breather valve for crankcase………………………................……………………………
Fuel system
Replace fuel lter…………………………………………………………………….………………
Cooling system
Replace coolant lter………………………………………………………………………..………
Check and supplement DCA to coolant…………….….......................................................….
2. Front brake system
Check status about disc worn to determinate replace it if required.……....……………………
3.Rear brake system
Check and record the worn status about rear brake disc unit............................................….
4.Air-condition
Check evaporimeter and cooling “S” pipe, clean as required.............................................….
Check fasteners to replace or adjust for compressor.........................................................….
Check status about coolant via window..............................................................................….
Check all system hoses and ttings for leakages...............................................................….
Check working status for air-condition................................................................................….
5.Lubrication
Front, rear transmissions cross shafts………………….……......................…..................…..4 points
Front, rear transmission shafts…………………………………………......…….................…..2 points
6. Body
Check the single clearance of brace piece axial pin seat and ange end face of frame .The shims
needs to be increased or replaced when the single clearance is above 1mm………..………
7.Steering
Check screw between steering arm and front suspension cylinder. If loosed or damaged ,tighten or
replace new screw.……..................………………………………………………………..………
Checker Date
Remarks
Lubrication and Servicing
Courtesy of Machine.Market