Safety
Safety, Operation and Maintenance Manual
2-36
SRT45 Off-Highway Truck
2.3.2.8 Preparing the machine
Before maintaining the machine:
●
Pla ce the pa rk ing sw it ch to "Pa rk "
position.
●
Move the transmission to Neutral position.
●
Raise the hand lever to "Float" position.
●
Run the engine at idle speed for 3 to 5
minutes to cool the engine.
●
Move the steering wheel back and forth
to release the residual pressure in the
accumulator.
●
Turn the start switch to OFF position and
stop the engine.
●
Close the windows and the cab door.
●
Lo ck a ll access d oo rs , boxes a nd
chambers.
●
When leaving your machine, face the
machine and maintain a three-point
contac t with it. Never ju mp off the
machine.
●
Be careful with slippery aisle and ladder
when dismounting the machine.
To Next Page
Loading...