Safety
Safety, Operation and Maintenance Manual
2-31
SRT45 Off-Highway Truck
2.3.1.8 After starting the engine
●
Run the engine at low idle for 3 to 5
minutes after engine startup, and check
the running parameters and make sure
they are normal and all readings are
within normal working range.
2.3.2 Operation
2.3.2.1 Inspection before operation
●
When conducting inspection, move the
machine to a spacious area without
barriers and operate slowly. Any other
person is not allowed to approach the
machine.
●
Be sure to buckle the seat belt. Check
the gauges and machine operation for
abnormality; check the swivel system and
steering system for abnormal operation.
●
Check for abnormal noise, vibration,
heating, odor or gauge reading; check oil
or fuel for leakage.
●
I n c a s e o f a n y a b n o r m a l i t y, s t o p
operation and take corrective measures
immediately.
2.3.2.2 Prior-operation precautions
To prevent serious injury or death, follow
the items below before moving the machine.
●
It is dangerous to stay in the working
range during machine operation. Sound
the horn to warn people within the working
range before operating your machine.
●
Nobody is allowed to stay on and near the
machine, or within the working range.
●
To improve the visibility in the travel
di re ct io n, yo u may t urn t he c ab i f
necessary.
Fig. 2.3-8
To Next Page
Loading...