SANY SRT45 - Precautions for Maintenance; Lock-Out and Tag-Out; Select a Working Area; Prior-Maintenance Precautions

Safety
Safety, Operation and Maintenance Manual
2-42
SRT45 Off-Highway Truck
2.4 Precautions for Maintenance
2.4.1 Lock-out and tag-out
●
Before maintenance, attach a Never
OPERATE tag or similar sign to the cab's
retarder lever to warn others that this
machine is under maintenance.
●
Attach other warning tags around the
machine if necessary.
●
When maintenance is underway, starting
the engine or moving the control levers or
pedals could lead to serious accident.
2.4.2 Select a working area
●
For maintenance work, select a clean flat
area with plenty of space, ample sunlight
and good ventilation.
●
Clean the working area by removing fuel,
lubricant and water, and covering slippery
ground with sand or other absorptive
materials.
●
Never leave your hammer or other tools at
the working area.
●
If a clean, tidy working area cannot be
guaranteed, there would be danger of
tipping, thus resulting in personal injury.
2.4.3 Prior-maintenance precautions
To prevent accidents:
●
Understand maintenance procedure
before operation.
●
Keep a clean and dry working area.
●
Never spray water or steam in the cab.
●
Never add lubricant and carry out other
maintenance work when your machine is
1
DANGEROUS
Never OPERATE
！
When this tag is not being used keep it in the
storage compartment.Still more,when there
is no storage compartment,keep it in the
operation manual case.
Fig. 2.4-1
Courtesy of Machine.Market