SANY SRT45 - Page 219

SRT45 Off-Highway Truck
8-65
Safety, Operation and Maintenance Manual
Maintenance inspection form for 2000hrs (supplement)
Except daily (10hrs) inspection projects, the following projects also have to nish after running
2000hrs.
8.Hydraulic system
Replace new lter for the return lter of hoisting system.....................................................….
Replace new lter for the return lter of cooling system.....................................................….
Replace new lter for the return lter of steering system...................................................….
Replace new lter for the lter which mounted on the pipeline of the steering system......….
Replace new lter for the lter which mounted on the pipeline of the cooling system........….
Replace new lter which mounted inside of the rear braking valve group..........................….
Replace new lter for the suction lter of the steering system...........................................….
Replace new lter for the suction lter of the hoisting system............................................….
Replace new lter for the suction lter of the cooling system.............................................….
Replace the breather valve for the steering hydraulic tank................................................….
Replace the breather valve for the hoisting hydraulic tank................................................….
Change oil for the tank and clean the whole tank and accessories....................................….
Check the pressure for the hydraulic system……………………………….………..…..………
Check the pressure for the steering system……………………………….……………..………
Check the pressure for the front braking system………………..……….………..……..………
9.Bearing
Replace new bearings for steering drag link......................................................................….
Replace new bearings for A-shape arm.............................................................................….
Replace new bearings for ends of the A-shape arm..........................................................….
Replace new bearings for steering cylinder........................................................................….
Check the wearing status for oscillating bearings of front suspension cylinder , replace new one if
the clearance of the bearing S≥ 0.55mm .Conversely, you could continue to use it
.…....................................................................................................................................…
Check the wearing status for oscillating bearings of rear suspension cylinder , replace new one if
the clearance of the bearing S≥ 0.63mm .Conversely, you could continue to use it
.…....................................................................................................................................…
Checker Date
Remarks
Lubrication and Servicing
Courtesy of Machine.Market