SRT45 Off-Highway Truck
8-87
Safety, Operation and Maintenance Manual
Maintenance inspection form for 3000hrs (supplement)
Except daily (10hrs) inspection projects, the following projects also have to nish after running
3000hrs.
7. Transmission
Check the status of the pin of injector, tighten it if required.…….........................……..………
Clean the breather valve for transmission and lubricates again.……...........……........………
Check status about block caution lamp for lter.……………………................................…….
Remark:
drain, replace lter and rell after 150hrs, if transmission has been xed.
8. Main reducer and differential assembly,Planetary assembly and power take-off (PTO)
Extract lubrication sample from Main reducer and differential assembly and Planetary assembly
for checking and analysis……………………………………………………......…………………
Check liquid level, rell as required…………………………………………......…………………
Check and clean the breather valve for rear axle.………………..............………………
Check and clean the breather valve for PTO……………………….............…………...…
Remark:
change oil when replace new one or after xed.
9. Front brake system
Check status about disc worn to determinate replace it if required……..............…………...…
10. Hydraulic system
Replace new lter for the return lter of hoisting system.....…………......................…………
Replace new lter for the return lter of cooling system……………................................……
Replace new lter for the return lter of steering system……………................................……
Replace new lter for the lter which mounted on the pipeline of the steering system………
Replace new lter for the lter which mounted on the pipeline of the cooling system.....……
Replace new lter which mounted inside of the rear braking valve group…………..…………
Replace the breather valve for the steering hydraulic tank………………………………….….
Replace the breather valve for the hoisting hydraulic tank………………………………………
Checker Date
Remarks
Lubrication and Servicing
To Next Page
Loading...