PY Manual Copyright © 2006 SANYO DENKI AMERICA, Inc.
7
Safety
DANGER
!
Only qualified personnel familiar with the construction and operation of this
equipment and the hazards involved should install, adjust, operate, or service
this equipment. Read and understand this manual and other applicable manuals
in their entirety before proceeding. Failure to observe this could result in severe
injury or loss of life.
DANGER
!
The user is responsible for conforming with all applicable local, national, and
international codes. The wiring examples in this manual are intended only as a
guide. Wiring practices, grounding and disconnects, and over-current protection
are of particular importance. Failure to observe this could result in severe injury
or loss of life.
DANGER
!
Do not operate the system in an explosive atmosphere. Failure to observe this
could result in severe injury or loss of life and equipment damage.
WARNING
!
Perform the initial power-up with the motor shaft disconnected from the load and
the shaft key removed. Improper wiring or undiscovered shipping damage could
result in undesired motion. Be prepared to remove power if excessive motion
occurs. Failure to observe this precaution could result in bodily injury.
WARNING
!
Large leakage currents exist in AC line filters. They must be grounded properly
before applying power. Filter capacitors retain high voltages after power is
removed. Before handling the equipment, voltage should be measured to
determine safe levels. Failure to observe this precaution could result in severe
bodily injury.
WARNING
!
Avoid damaged cables. Cables may be damaged by applying excessive stress,
placing a heavy object on them, or cutting them. Damaged cables may result in
electrical shock which can cause severe bodily injury and damage equipment.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
