PY Manual Copyright © 2006 SANYO DENKI AMERICA, Inc.
6
Chapter 4. System Configuration describes how to use the remote operator and then
walks you through the configuring and tuning of your system. This
chapter concludes with a detailed description of each amplifier parameter.
Chapter 5. Operation chapter provides a detailed description of the sequence and
timing of operation within the amplifier.
Chapter 6, Drive Setup chapter provides information on setup of the drive
configuration for operation
Chapter 7, Amplifier Parameters chapter provides a list of all parameters used for
the drive configuration.
Chapter 8. Maintenance and Troubleshooting provides you with a recommended
maintenance program designed to keep your system in top operating
condition. Should you experience any difficulty with your system, a
detailed troubleshooting guide is provided to help you restore normal
operation quickly.
Chapter 9. Specifications section includes detailed specifications for PY drive
systems. This includes a detailed reference for all the amplifier parameters.
To help you locate and interpret information easily, this guide uses consistent visual cues
and text formats. The different symbols and typefaces displayed in this guide are used
for the following purposes:
Table 1: Manual Syntax
This symbol is used to identify important information of which you
should take note.
!
DANGER, WARNING or CAUTION require accompanying information
notices to prevent potential personal injury and equipment damage.
DANGER: Indicates an imminently hazardous situation which, if not
avoided, will result in serious injury or death. This signal word is limited
to the most extreme situations.
WARNING: Indicates a potentially hazardous situation which, if not
avoided, could result in serious injury or death.
CAUTION: Indicates a potentially hazardous situation which, if not
avoided, may result in equipment damage or minor or moderate injury.
Earth Gnd Protective conductor terminal, Earth Ground.
Chassis Gnd Chassis terminal, Not a protective ground.
Syntax
Information
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
