20
What is PIN code?
PIN (Personal Identification Number) code is a security
code that allows the person who knows it to operate the
projector. Setting a PIN code prevents unauthorized use of
the projector.
A PIN code consists of a four-digit number. Refer to the PIN
code lock function in the Setting Menu on pages 57-58 for
locking operation of the projector with your PIN code.
Enter a PIN code
Use the Point buttons to enter a number. Press the Point
button to fix the number and move the red frame pointer
to the next box. The number changes to ⁄.If you fixed an
incorrect number, use the Point button to move the pointer
to the number you want to correct, and then enter the
correct number.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to Set.
Press the SELECT button so that you can start to operate
the projector.
If you entered an incorrect PIN code, PIN code and the
number (⁄⁄⁄⁄) will turn red for a moment. Enter the
correct PIN code all over again.
CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the projector can no
longer be started. Take a special care in setting
a new PIN code; write down the number in a
column on page 81 of this manual and keep it
on hand. Should the PIN code be missing or
forgotten, consult your dealer or service center.
After the OK icon disappears, you can operate
the projector.
PIN Code Input Dialog Box
P
Note:
• If the PIN code number is not entered within
three minutes after the PIN code dialog box
appeared, the projector will be turned off
automatically.
• The "1234" is set as the initial PIN code at
the factory.
Basic Operation
To Next Page
Loading...
Need help?
General
Weight and Dimensions
